Knowledgebase Home | Contact Knowledgebase Home
X-Arcade Coin Door Manual & Cutout Template
Article Details

Last Updated
23rd of March, 2015

NOTE: The coin door switch uses different pins than those in our controllers. You will want to use the 2 outside pins on the switch and do not use the center pin on the switch.

X-Arcade Coin Door Manual

X-Arcade Coin Door Cutout Template
NOTE: If printing, be sure to turn off page scaling.

To make it work with foreign currencies, you can buy coin mechs here.

IMPORTANT!: The center pin of the coin door microswitch is not used. Use the 2 pins furthest from each other.
Related Articles
No related articles were found.
No attachments were found.